The History of my Equipment:

    Start: ICOM IC211e, TransistorPA 40W (bought from OE6BOG), Hybrid-Quad and/or 6el Quad
    later: Kenwood TS770, QQE/06-40 (Homemade, OE6SJG Design), 16el, 9el and 19el F9FT
    later: Kenwood TS770, 2x 4X150 (Homemade, DL9GU Design), 16el 9el and 19el F9FT, Preamp S3030 (Homemade)
    later: Kenwood TS770, 4CX250b (DK1OF Design), 16el 9el and 19el F9FT, Preamp S3030 (Homemade)
    later: Kenwood TS770, 2x 4CX350a (modified from OE5NEL), 16el 9el and 19el F9FT, Preamp S3030 (Homemade)
    later: Kenwood TS770, 4CX250r (Fischer F202, modified for MS), 16el 9el and 19el F9FT, Preamp S3030 (Homemade)
    later: Kenwood TS770, GS35b (HG8UG), 4x10/9BV (Homemade), Preamp S3030 (Homemade)
    later: Yaesu FT736r, GS35b (HG8UG), 4x10/9BV (Homemade), Preamp MGF1302
    later: ICOM IC-7400, GS35b (HG8UG), 4x10/9BV (Homemade), Preamp MGF1302
    later: ICOM IC-7400, GU74b (LZ2US), 4x10/9BV (Homemade), Preamp LNA145-MK-II (NE-334S01)
    next? .... PERHAPS 4x9el-XYagies ...



    I use following Equipment for VHF:
    (on 6m and 70cm i`m not more qrv - no place for other antennas on the roof)

    TRx: IC7400 , IC706MKiiG , FT736r and the good old ICOM IC-202

    Antennas: Homemade by OE6IWG 4*10el_9BV (h-stack 3.00m e-stack 3.29m) max 65° Elevation

    Cable: TX = 7/8" Andrew , RX = H2000_flex, Feedline H2000_flex

    Mast: (and the complete H-Frame) are Homemade by OE6IWG (Details)
    Coax-Relais on the Mast: HF400-2z and CX-520d
    Preamp: LNA145-MK-II (with NE-334S01 - from SSB-Electronic) on the Mast

    AZ-Rotor: Prosistel PST-2051 (450deg turning radius) with ControlBox "C" from IK7MWR-I7PHH.
    El-Rotor: KR500 (UKW-Technik) - Spare: Prosistel PST75-10 from IK7MWR-I7PHH.

    Coax-Relais in the Shack: NARDA

    Sequencer: Homemade by OE6IWG (Infos ARRL-Handbook N6CA)

    Power: GU74b (LZ2US)
    Spare: GS35b - Driver: 2x MRF247

    Software/Hardware for Meteorscatter:
    DTR+ from DF7KF/DL8EBW
    JUDSP from DK6JU and DL9AN
    PC486-66 with OH5IY Software for HSCW
    P2-500 with 9A4GL Software for HSCW
    or ETM8c modified for HSCW
    P4-2600 with WSJT/K1JT for FSK441

    Software/Hardware for EME:
    P4-2600 with Spectrum Laboratory DL4YHF
    PC386_40 with CW4KEY/SkyMoon/W5UN for CW
    P4-2600 with WSJT/K1JT for JT65b

    Pse Note:
    My Home-QTH Kapfenberg
    (520m asl) is surrounded by mountains (up to 1630m asl), so VHF-DX is very difficult!
    Here can u see the Elevation i need! ...

    my TakeOff from JN77pk: and a 360° View:


    
     My Shack
    The RadioCorner , The ComputerCorner , The SolderCorner

    
     My Antennas
    Mai/1980 -> Mai/1998 click and from Mai/1998 click

    Top

    Last update:   November 9, 2009   by O E 6 I W G